Bambu Lab Induction Hotend (Right) for H2C with Hardened Steel Nozzle – 0.4 mm (FAH051)

Name: Bambu Lab Induction Hotend (Right) for H2C with Hardened Steel Nozzle - 0.4 mm (FAH051)
Brand: Bambu Lab
SKU: FAH051
Price: 43.51 USD
Availability: InStock

SKU

FAH051

Product Details

Product: Induction Hotend
Brand: Bambu Lab
SKU: FAH051
Material: Hardened Steel
Nozzle Size: 0.4 mm
Max Temp: 350°C
Flow Type: Standard Flow
Compatible Model: H2C

Multi-Material Printing with Less Waste

The Vortek System uses up to six interchangeable induction-heated hotends to achieve true multi-material printing with significantly reduced purge waste compared to single-nozzle systems. The hotend swap mechanism eliminates purge flushing during filament changes (H2C under 7 filaments), saving both material and time.

Fast and Precise Induction Heating

The Vortek Induction Hotend rapidly heats the nozzle to printing temperature in approximately 8 seconds (PLA). This fast response shortens color-change transitions and further reduces purge waste. Integrated overheat, overvoltage, short-circuit, and open-circuit protection ensure reliable performance during continuous multi-material workflows.

Reliable Contactless Connection

Instead of contact-based metal pins—which can oxidize and degrade over time—the Vortek System employs a contactless, high-frequency power and signal interface. This delivers a stable, long-lasting connection for accurate temperature control and synchronized hotend operation.

Heatsink Overheat Monitoring

Dual temperature sensors monitor both nozzle and heatsink temperatures in real time. When heatsink temperature exceeds safe limits, the system automatically increases cooling to prevent heat creep and reduce the risk of clogging.

Intelligent Multi-Hotend Management

Each Vortek Hotend stores its filament information locally, ensuring correct material mapping and preventing loading errors. When printing with more than seven filament types, the system intelligently optimizes hotend mapping to minimize purge waste and improve overall efficiency.

Filament	Induction 0.2 mm Stainless Steel	Induction 0.4 mm Hardened Steel	Induction 0.6 mm Hardened Steel	Induction 0.8 mm Hardened Steel	Induction 0.4 mm High Flow Hardened Steel	Induction 0.6 mm High Flow Hardened Steel	Induction 0.8 mm High Flow Hardened Steel
PLA Basic	√	√	√	√	√	√	√
PLA Matte	√	√	√	√	√	√	√
PLA Lite	√	√	√	√	√	√	√
PLA Basic Gradient	√	√	√	√	√	√	√
PLA Silk+	√	√	Not recommended	Not recommended	√	Not recommended	Not recommended
PLA Silk Dual Color	√	√	Not recommended	Not recommended	√	Not recommended	Not recommended
PLA Silk	√	√	Not recommended	Not recommended	√	Not recommended	Not recommended
PLA Metal	√	√	√	√	√	√	√
PLA Marble	X	√	√	√	√	√	√
PLA Sparkle	X	√	√	√	√	√	√
PLA Wood	X	√	√	√	√	√	√
PLA Galaxy	Not recommended	√	√	√	√	√	√
PLA Glow	X	√	√	√	√	√	√
PLA Translucent	Not recommended	√	√	√	√	√	√
PLA tough+	√	√	√	√	√	√	√
PLA-CF	X	√	√	√	Not recommended	√	√
PLA Aero	X	√	Not recommended	Not recommended	√	Not recommended	Not recommended
PETG HF	√	√	√	√	√	√	√
PETG Basic	√	√	√	√	√	√	√
PETG Translucent	Not recommended	√	√	√	√	√	√
PETG-CF	X	√	√	√	Not recommended	√	√
ABS	√	√	√	√	√	√	√
ABS-GF	X	√	√	√	√	√	√
ASA	√	√	√	√	√	√	√
ASA Aero	X	√	Not recommended	Not recommended	√	Not recommended	Not recommended
ASA-CF	X	√	√	√	Not recommended	√	√
PC	√	√	√	√	√	√	√
PC FR	√	√	√	√	√	√	√
TPU for AMS	X	√	√	√	√	√	√
TPU 95A HF	X	√	√	√	√	√	√
TPU 85A	X	X	√	√	X	Not recommended	Not recommended
TPU 90A	X	√	√	√	Not recommended	Not recommended	Not recommended
PAHT-CF	X	√	√	√	Not recommended	√	√
PET-CF	X	√	√	√	Not recommended	√	√
PA6-CF	X	√	√	√	Not recommended	√	√
PA6-GF	X	√	√	√	Not recommended	√	√
PPA-CF	X	√	√	√	Not recommended	√	√
PPS-CF	X	√	√	√	Not recommended	√	√
Support for ABS	X	√	√	√	√	√	√
Support for PLA/PETG	√	√	√	√	√	√	√
Support for PA/PET	X	√	√	√	√	√	√
Support for PLA (New Version)	√	√	√	√	√	√	√
PVA	X	√	√	√	√	√	√