DIY Line Follower Robot Kit D2-1 (Analog)

DIY Line Follower Robot Kit Alanog

LINE FOLLOWER ROBOT

Get this DIY Intelligent Line follower/Tracking Smart Car Kit with all essential parts to build and Learn your own DIY line follower robot car This car just needs a 3V power supply to operate from two AA batteries. This comes with two powerful geared BO motors and all the required parts and ICs to run the robot, you do not need to use any driving board or coding to program it. you just need little soldering knowledge to assemble this bot..

Features

• Complete DIY educational robotics kit
• Infrared sensor-based line following robot detection
• Easy to assemble with pre-drilled chassis and wiring guide
• Ideal for beginners, schools, and robotics workshops

KIT CONTAINS:

• 1 × PCB board
• 2 × BO motors (yellow, single shaft)
• 2 × Wheels (yellow with black tire)
• 1 × 2AA battery holder with wires
• 1 × IC LM393 with 8-pin DIP base
• 2 × 10K preset
• 2 × 100uF capacitor
• 2 × LDR
• 2 × 8550 transistor
• Resistors: 2×1K, 2×10K, 2×3.3K, 4×51K
• LEDs: 2 red, 2 white (5mm)
• 1 × Power switch
• 1 × Nut & bolt set
• 2 × Motor wires (black/red)
• 2 × Screws
• 1 × User manual
• Battery Not Included

JUST WIRE IT | POWER IT