MPU 9250 9 DOF 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module

• Acceleration, Gyroscope, and Magnetometer

• 9 DOF module

• Build-in ultra-low noise linear LDO voltage regulator.

• Built-in onboard filters, which reduce noise from the motor and other high current electronics.

• All sensors are connected to the I2C bus.

• Build-in the Logic level converter for I2C.

• Power indicator LED.

• Using Immersion Gold PCB, machine welding process to ensure quality.

• On-board pull-up resistors on SDA, SCL, and nCS

• On-board pull-down resistors on FSYNC and AD0

MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis  accelerometer and gyroscope. The other die houses the AK8963 3-Axis magnetometer. Hence, the MPU-9250 is a 9-axis Motion Tracking device that combines a 3-axis accelerometer, gyroscope and magnetometer, and a Digital Motion Processor (DMP). It is based on I2C Address, Address: 0x68 by default, 0x69 if AD0 is pulled high.

Applications

• FPV, RC, and Robots systems

• GPS navigation systems

• Impact recognition and logging

• Gaming and virtual reality input devices

• Motion-activated functions

• Intelligent power saving for handheld devices

• Vibration monitoring and compensation

• Free-fall detection

Features :

• Acceleration, Gyroscope, and Magnetometer

• 9 DOF module

• Build-in ultra-low noise linear LDO voltage regulator.

• Built-in onboard filters, which reduce noise from the motor and other high current electronics.

• All sensors are connected to the I2C bus.

• Build-in the Logic level converter for I2C.

• Power indicator LED.

• Using Immersion Gold PCB, machine welding process to ensure quality.

• On-board pull-up resistors on SDA, SCL, and nCS

• On-board pull-down resistors on FSYNC and AD0