MH-100X HB-100 10.525GHz Microwave Sensor Analog 2-16 Meters Doppler Radar Human Body Induction Switch Module

$6.04

  • Operating voltage: 5V
  • Range: 2 – 16 meters
  • Onboard dower LED
  • Onboard detection LED
  • Arduino Compatible
Features:
This detection method has the following advantages over others detection method:
  • Contact less detection
  • Does not affect temperature, humidity, noise, air flow, dust, light, etc., suitable for harsh conditions
  • Protection against radio frequency interference
  • The output power is small, does not harm the body structure
  • Detection distance
  • Support for the detection of non-living objects
  • The direction of the microwave oven is very good, the speed is equal to the speed of light
Specifications:
  • Operating voltage: 5V
  • Operating current (CW): 50mA max., 30mA typical
  • Size: R = 30.6 mm
  • Detection distance: used with adapter plate or control circuit below, 2-16 m continuously adjustable (minimum 2 m, maximum 16 m)
  • Helium Frequency: 10.525 GHz
  • Frequency setting accuracy: 3 MHz
  • Output Power (Minimum): 13dBm EIRP
  • Harmonic emission: <-10 dBm
  • Average current (5% DC): 2 mA typ.
  • Pulse Width (min.): 5 uSec
  • Duty Cycle (min.): 1%
  • Sensitivity (10 dB S / N factor) 3 Hz to 80 Hz bandwidth: -86dBm
  • 10.3 Hz to 80 Hz 10uV bandwidth
  • Antenna Gain: 8dBi
  • Vertical Beam Width 3 dB: 36 degrees
  • Water Level 3 dB Beam Width: 72 degrees
Note:- The sensor has a continuous adjustable range of 2-16 m, the potentiometer is adjustable along the minimum direction, the detection distance is reduced and the potentiometer is adjusted against the direction of the mines, and the detection distance increases.
Weight0.010 kg
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “MH-100X HB-100 10.525GHz Microwave Sensor Analog 2-16 Meters Doppler Radar Human Body Induction Switch Module”

Your email address will not be published. Required fields are marked *

RELATED PRODUCTS