Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera

1. Small size and Lightweight module.
2. Easy to use.
3. Equips onboard photoresistor and adjustable resistor
4. Allows adding night vision function to RPi Camera (E) or RPi Camera (F).

How to Use :

1. Connect the Infrared LED Board to the camera PCB by screws.
2. The screw holes are used for both attachment and power supply.
3. Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically.
4. When ambient light is lower than the threshold value, the infrared LED is on, vice versa.

Note :

1^st    – The 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested.
2^nd  –  Ideal imaging distance is within 3m. When the distance goes up to 6m, the night vision camera can just capture blurry outlines.

Features :

1. Small size and Lightweight module.
2. Easy to use.
3. Equips onboard photoresistor and adjustable resistor
4. Allows adding night vision function to RPi Camera (E) or RPi Camera (F).